One of the easiest ways to unclog your pipes is to pour boiling water down them. You can pour the water in stages, allowing the water to dissolve the obstructions along the way. Pouring boiling water down your drain is cheap and easy to do, as well as environmentally friendly. Once you are sure that the drain is clear, you can pour hot water down it again. However, this isn’t going to work with substantial blockages.
Another way to unclog your drains is to mix baking soda and vinegar. This combination creates a chemical reaction which will help dissolve even the toughest blockages. Pour in this mixture and leave it for about fifteen minutes, and then pour boiling water down the drain to flush the mixture. This method is especially effective if your clog is small. However, you should always wear gloves and eye protection when handling caustic soda.
Specialist drain unblocking chemicals are another option but they can cause chemical burns. You can buy this from any hardware store or supermarket but always use caution with this chemical. The mixture should be poured straight down the drain and it should dislodge small to medium blockages.
If the blockage is small enough, you can try using any of the above methods to unblock the drain. A small amount of vinegar can also unclog a small sink. Larger drains, however, may require a plumber to remove the blockage physically, especially if it is deep inside the pipework or damage has been caused to the pipe. Should you require the services of Drain Lining Windsor, go to https://www.drainpower.co.uk/drainage-services/drain-lining/drain-lining-windsor/
If the blockage is deep in the drain pipes, use a drain snake or pipe cleaner. These tools are easy to find at any home improvement store. Simply insert the snake into the drain and manipulate it until the clog is removed. After a few minutes, flush the drain with water. You can repeat this process as often as necessary but for consistent problems, always seek the advice of a plumber.
The simplest methods to unblock a pipe for DIYers involve drain cleaner, baking soda or boiling water. Boiling water helps dissolve organic materials trapped in the pipes. However, do not use this method if your sink is made of PVC pipes as it can damage the joints. Boiling water should also not be poured into a porcelain sink bowl, as this can crack the ceramic.